DISTRIBUTED ANTENNA SYSTEMS

For the most powerful, comprehensive line of receive antennas, boosters, and filters.

Receive Antennas
and Boosters

Receive Combiners

Receive Splitters

Transmit Combiners

Transmit Antennas
and Boosters

RF Over Fiber

Wisycom Manager Network

The ‘control center’ for a ‘birds-eye view’ monitoring, and seamless control of the Wisycom’s entire Distributed Antenna System.

wisycom_network_manager_logo_red_black
das_nav_receive_antennas_boosters

RECEIVE ANTENNAS AND BOOSTERS

The most powerful line of receive antennas, boosters, and filters.

Receive Antennas

LBN2
Directional Antenna

LBN2-FRONT

LBN2 is a wideband UHF LPDA antenna (log periodic dipole array).

Features:

•   Skeletal Design LPDA for Minimal Wind Loading
•   Future proof huge reception bandwidth 420-1300 GHz
•   Bend elements for maximum directionality with minimum size
•   6 dBi gain
•   Typical beam width of 140-degrees
•   Robust metal support with fine slope tuning
•   Full metal support and mounting base (1/4″ & 3/8″)
•   Textured Weather-Resistant Coating
•   Waterproof with gasket sealing
•   BNC connector (LBN2) or N connector (LNN2) available

ADB2
Omnidirectional Antenna

ADB2-FRONT

ADB2 is a wideband, UHF omnidirectional antenna.

Features:

•   Huge frequency range of 400-1160 MHz
•   3.2 dBi of gain
•   Stationary wave ratio < 1:1.5 in the range 450÷870 MHz and < 1:1.9 in the range 400÷937 MHz
•   OIP3: +43 dBm (Output 3° order Intercept Point) typical
•   Epoxy fiberglass (copper – clad) with black matte finish
•   5/8” mounting or 3/8” with adapter
•   BNC connector (ADB2) or N connector (ADN2) available

Boosters

BAA
Wideband Antenna Amplifier

BAA

BAA is a wideband antenna booster designed to increase gain up to 16 dB in applications with long cables feeding wireless microphone receivers.

Features

•   Wide bandwidth operation 470-870 MHz
•   Very high linearity (OIP3 > 40 dBm) to prevent distortion
•   Up to 16 dB gain adjustable in 1 dB steps
•   Powered via coax
•   Pass thru DC available for device cascade operation of several BAAs

BAW
High Power Wideband Antenna Amplifier

baw-P3240698

 

BAW is a high-power wideband antenna booster designed to increase gain up to 22 dB in applications with long cables feeding wireless microphone receivers.

Features:

•   Wide bandwidth operation 470-870 MHz
•   Very high linearity (OIP3 > 47 dBm) to prevent distortion
•   Up to 22 dB gain settable in one dB step
•   Powered via coax
•   Pass thru DC available for device cascading
•   RGB LEDs for status indications

Booster & Filter

BFA
Wideband Antenna Amplifier
with remoted controlled filters

bfa

BFA integrates a powerful bank of filters along with a low noise amplifier for maximum reception control. Adjust via navigation buttons and a TFT display or remotely via coax using the Wisycom Manager Network.

Features

•   Huge reception band: 410-1300 MHz
•   Remote controllable via Wisycom Manager Network
•   
RF gain from -12 to +27 dBu (1 dB steps)
•   Easy configuration via onboard buttons and TFT display
•   Adjustable bandpass filter for precise interference control
•   Antenna off for RF zone disabling
•   Fixed band saw filter (940-960 in USA)
•   Pass thru DC available for device cascading
•   3 High Pass & 3 Low Pass filters
•   Waterproof with gasket sealing

Antennas with Integrated Boosters / Filters

LFA
Directional Antenna with Remote
Controllable Amplifier and Filters

LFA-FRONT

The LFA combines the accurate, rugged, wind-resistant design of the LBN2 directional antenna with the power of the BFA active amplifier with remote-controllable filters for maximum reception control. Designed to withstand the elements, the LFA gives a full antenna control of multiple RF zones via the Wisycom Manager Network.

Features:

•   Huge reception band: 410-1300 MHz
•   Remote controllable via Wisycom Manager Network
•   RF gain from -12 to +27 dBu (1 dB steps)
•   Easy configuration via onboard buttons and TFT display
•   Adjustable bandpass filter for precise interference control
•   Antenna off for RF zone disabling
•   Fixed band saw filter (940-960 in USA)
•   Skeletal design for low wind loading
•   3 High Pass & 3 Low Pass filters
•   Waterproof with gasket sealing

ADFA
Omni Antenna with Remote Controllable
Amplifier and Filters

ADFA-FRONT

The ADFA combines the rugged, weather-resistant design and linear characteristics of the ADB2 with the power of the BFA active amplifier with remote-controllable filters for maximum reception control. The ADFA gives a full antenna control of multiple RF zones via the Wisycom Manager Network.

Features:

•   Huge reception band: 410-1160 MHz
•   Remote controllable via Wisycom Manager Network
•   RF gain from -12 to +27 dBu (1 dB steps)
•   Easy configuration via onboard buttons and TFT display
•   Adjustable bandpass filter for precise interference control
•   Antenna off for RF zone disabling
•   Fixed band saw filter (940-960 in USA)
•   Skeletal design for low wind loading
•   3 High Pass & 3 Low Pass filters
•   Waterproof with gasket sealing

LBNA2
Directional Antenna with Amplifier

LBNA2-FRONT

The LBNA2 combines the accurate, rugged, wind-resistant design of the LBN2 directional antenna with the 16 dB of adjustable gain offered by the BAA is a wideband antenna booster.

Features:

•   Skeletal Design LPDA for Minimal Wind Loading
•   Typical beamwidth of 140-degrees
•   Wide bandwidth operation 470-870 MHz
•   Very high linearity (OIP3 > 40 dBm) to prevent distortion
•   Up to 16 dB gain adjustable in 1 dB steps
•   Powered via coax

das_nav_combiners

RECEIVE COMBINERS

Unmatched cost-efficiency and flexibility for multi-zone RF

Wisycom’s RF Combiners offer unmatched cost-efficiency and flexibility to multi-zone system design by utilizing antenna network rather than duplicating wireless receiver per zone. Furthermore, they simplify and minimize complementary equipment and interconnects such as signal processors, console inputs and required cabling.

MAT288
Diversity RF Matrix Combiner

MAT288-FRONT
MAT288-BACK

The MAT288 is a programmable RF Matrix Combiner designed for applications in which multiple zones of diversity antennas are routed to feed wireless audio receivers.

Configurations:

•   8:1 Diversity Combiner with 6dB gain
•   8:4 Diversity Combiner with 0dB gain
•   2x 4:2 Diversity Combiners

wisycom_network_manager_seal_01

MAT244
RF Matrix Combiner

MAT244-FRONT
MAT244-BACK

The MAT244 is a programmable RF Matrix Combiner designed for applications in which multiple zones of diversity antennas are routed to feed wireless audio receivers.

Configurations:

•   4:2 diversity combiner with 7dB gain
•   8:4 non-Diversity combiner
•   8:1 non-Diversity combiner with 7dB gain

wisycom_network_manager_seal_01

Compact Combiner / Splitters
Wisycom's series of compact, passive wideband combiner / splitters are great problem solvers.
Each possesses unique features to fit specific needs.

CSA121A

csa121a

CSA121A Wideband Combiner / Splitter

     •   Passive Combiner →1 x 2:1
     •   Passive Splitter →1 x 1:2
     •   DC-coupled for use with antenna booster/ active antennas.
     •   Handles up to 1.5 Amps for high power IP3 booster driving (i.e. Wisycom BAW)
     •   Supplied with 230/110 Vac power supply with locking connector

CSA121B

CSA121B

CSA121B Wideband Combiner / Splitter

•   Passive Combiner →1 x 2:1
•   Passive Splitter →1 x 1:2
•   Works with input power up to 2W
•   DC pass-through for antenna booster powering

CSA221

csa221

CSA221 Wideband Combiner / Splitter

•   Passive Combiner →2 x 2:1
•   Passive Splitter →2 x 1:2
•   DC pass-through for antenna booster powering
•   Handles up to 1.5 Amps per side for high power IP3 booster driving (i.e. Wisycom BAW)

das_nav_spliiters

RECEIVE SPLITTERS

Providing the most control and cleanest signal path for each antenna's RF

Wisycom SPL2216 and SPL2208 offer maximum splitting that adds combining flexibility in a 1RU chassis for wireless mic receiver applications. Designed to maintain RF integrity, these splitters possess quality components and circuit design for the highest RF robustness and linearity to resist intermodulation distortion with applications utilizing high-density equally spaced frequencies.

SPL2216
Active Combiner / Splitter
2 diversity zones x 16 diversity outputs

SPL2216-FRONT
SPL2216-BACK

SPL2208
Active Combiner / Splitter
2 diversity zones x 8 diversity outputs

SPL2208-FRONT
SPL2208-BACK

The ability to split one or two pairs of diversity pair antennas adds flexibility shared by no other splitters on the market today. This provides unparalleled features to the SPL2208, while the SPL2216 adds the ability to feed twice as many wireless microphone receivers than any other multi-coupler available.

SPL2216 & SPL2208 Features:

•   Wideband operation: 170-1260MHz
•   Perfect for 1 or 2 zone applications
•   Split outputs for 2) MAT288 units
•   Cascade to additional SPL for additional diversity outputs
•   Remote control via Wisycom Manager Network

wisycom_network_manager_seal_01
das_nav_combiners

TRANSMIT COMBINERS

Passive combiners that eliminate combiner loss for use with the MTK952 Transmitter (2WO version).

Transmit Combiners
Passive combiners designed to deliver power compensation benefits when used with the MTK952 Transmitter (2WO version).

CSI16T
Smart Transmit Combiner
(For use with the MTK952 IEM/IFB 2WO Transmitter)

CSI16T-front
CSI16T_rear

The CSI16T is a passive, wideband combiner specifically designed for use with the MTK952 IEM/IFB Transmitter (2WO version with up to 2 watts output). The CSI16 communicates with the MTK952 Transmitter to compensate for combiner loss by increasing power from the TX side!

Other features:

  • 16 Input Combiner – select 4, 2, or 1 output(s)
  • 3 position, Front Panel I/O selector enables [16:1], 2x [8:1] or 4x [4:1]
  • Wideband operation (470-800MHz)
  • Use in conjunction with the CSA121T Combiner to recover up to 15dB of loss (16:1 configuration)

CSA121T
Smart Transmit Combiner / Splitter

CSA121T

•   Passive Combiner →1 x 2:1
•   Passive Splitter →1 x 1:2
•   Works with high input power – up to 3W
•   Becomes a smart combiner when used with Wisycom MTK952 Transmitter
•   Recovers combiner loss as MTK952N increases output power as needed

Note: the CSA121T does not have 12V Bias pass-through capabilities

das_nav_transmit_antennas_boosters

TRANSMIT ANTENNAS AND BOOSTERS

The right tools for optimal transmission radiation and gain

PAW
Wideband Antenna Amplifier

PAW

PAW is a wideband antenna amplifier for RF over fiber or other applications requiring increased gain to transmit antennas.

Features:

•   Amplifies RF signal 20 dB (Max 250 mW EIRP)
•   Powered by 12V bias via coax from transmitter or MFL system
•   Rugged aluminum waterproof chassis
•   PAWN version features waterproof sealed N connector

Variations:

•   PAW-V working in 170-250 MHz
•   PAW-L working in 435-700 MHz
•   PAW-H working in 566-800 MHz

LBP-LNP
Wideband Antenna with Amplifier

LBP

The LBP/LNP combines the accurate, rugged, wind-resistant design of the LBN2 directional antenna with an integrated PAW wideband antenna amplifier for RF over fiber or other applications requiring increased gain to transmit antennas.

Features:

•   Amplifies RF signal 20 dB (Max 250 mW EIRP)
•   LPDA design enhances transmission ~ 6dB gain
•   Powered by 12V bias via coax from transmitter or MFL system
•   Rugged aluminum waterproof chassis
•   LNP version features waterproof sealed N connector

Variations:

•   LxP -L working in 435-700 MHz
•   LxP -H working in 566-800 MHz
•   
LxP -X working in up 960 MHz
•   LxP -W working in up 1300 MHz

MPA4
4 X 4 Power Amplifier

MPA4

MPA4 is a quadruple wideband antenna amplifier for RF over fiber or other applications requiring increased gain to transmit antennas.

Features:

•   Wideband operation range/ model of 470-620 MHz/ 600-800MHz
•   Highly linear for reamplification of multiple carriers without intermod: OIP3 > 50dBm
•   Powered by 110/230 Vac
•   Optional redundant 12VDC power supply available

Passive Antennas for transmit applications include:

LBN2
Directional Antenna

LBN2-FRONT

LBN2 is a wideband UHF LPDA antenna (log periodic dipole array).

ADB2
Omnidirectional Antenna

ADB2-FRONT

ADB2 is a wideband, UHF omnidirectional antenna.

das_nav_rf_oover_fiber

RF OVER FIBER

Wisycom’s RF over fiber system is based on the MFL framework - a modular, flexible design that maintains RF integrity with dynamic range control, networking ability, and backup redundancy that satisfies the needs of any production.

MFL
Wideband Optical Link

MFL-RRTT-FRONT
MFL-RRTT-BACK
wisycom_network_manager_seal_01
wisycom_network_manager_logo_red_white

Wisycom Manager Network

The ‘control center’ for a ‘birds-eye view’ monitoring and seamless control of the Wisycom’s entire Distributed Antenna System.

Wisycom Manager integrates Combiners, Splitters, remote RF Fiber Links for complete monitoring and control of the entire Wisycom Distributed Antenna System. Simply stated, this smart network is controlled by:

  1. a Windows PC with Wisycom Manager software, connected to
  2. a network switch, and
  3. Wisycom products with 10/100 Base-T Ethernet ports

 

Real-time remote monitoring and control of Distributed Antenna Systems include:

  • Enable/ disable RF inputs
  • Monitor / control on / off bias power
  • Monitor warnings, alarms, fans
  • Monitor/control MFL Failsafe Switch
  • Control input MAT, SPL and MFL RF attenuation
  • Remote control antenna power plus gain and filter settings for BFA, LFA and ADFA smart antennas/ boosters
  • And more…
image7