Wisycom Usa

Vox Infragilis

Wisycom International
Wisycom USA
Wisycom Germany
Wisycom Italy

MTP60

Bodypack Transmitter

MTP60 is a pocket transmitter specially designed for professional wireless microphone applications.

FEATURES

  • The multi-band MTP60 currently has the widest tuning range of any wireless transmitter on the market (470 to 1075MHz)
  • Monitor & control with Bluetooth via Wisycom Manager software or mobile device apps to adjust parameters in real time
  • Dedicated hardware allows accurate real time position monitoring with advanced user interface
  • Advanced linear technology (L20mW) eliminates intermodulation distortion for more robust signal
  • Embedded recorder to record directly on the MTP60 memory card and integrated Linear Time Code decoding
  • Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
  • An integrated haptic engine that gives tactile feedback with different vibration patterns
  • FPGA based signal processing allows easy switching between wide and narrow band operation
  • Miniature design with flexible PCB (no connectors) for extended reliability
  • New ENS compander for a totally clear sound
  • Powering with 2 x AA battery (Alkaline, NiMh, Lithium) or MPRLBP lithium battery (5.55 Wh)
  • Bluetooth interface and mobile app allows full control from mobile or tablet
  • Integrated low-pass audio filter eliminates ultrasonic interference from devices such as focus pullers
  • Bluetooth 5 Long Range (Class 1, 100mW) with the MRK16 as a bridge allows remote control the MTP60 over hundreds of meters
  • Front panel buttons to quickly enter menu thanks to its multiple shortcut combinations
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power to use wired mic thru the PHA60 accessory
Download
Frequency rangesfrom 470 to 1075 Mhz, depends on the country (see Configurations)
Switchable channels2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window Up to 362 MHz, depending on band (see Configurations)
Frequencies Quartz PLL frequency synthesizer circuit (5 kHz step)
Frequency error±2.5 ppm, in the rated temperature range
RF Powerswitchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW
note: in some countries high power can be disabled, for local norm!
Antenna connectorLEMO-F 1 pin
Modulation wideband/narrowband FM, with digital audio conditioning (FPGA)
Nominal deviation±40 kHz Wideband / ±25 kHz Narrowband
Peak deviation±56 kHz Wideband / ±35 kHz Narrowband
Spurious emissions< 2 nW
Telemetry featureTX transmits also a digitally modulated sub-carrier, suitable for:
tone-squelch operating
remote battery monitoring
optional PTT (push to talk) operation
Noise Reduction systemENS - Wisycom Extended-Sound Optimized
AF bandwidth 45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB)
45 Hz ÷ 20 KHz (3dB) in WideBand mode (WB)
Distortion< 0.3 % (0.15 % typ.)
SND/D ratio (Analogue)typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband
Audio input connectorLEMO 3pin
Audio input levelfrom -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps
Max input level +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Storage mediamicro SD memory card (.wav files - BWF)
Time codeLinear time code decoding
Bit rate16 bit / 24 bit / 32 bit
Sampling rate48 kHz
Managing interfaceBluetooth 5 long range, USB-C, IrDA
LED2 RGB LEDs (red, green and blue) for audio, RF and battery status.
1 LED for recording, 1 LED for battery charger
Battery lifetime indicationpercentage or minute/second
PTT functionPin 3 of the AF connector can be setup to an external push button
DisplayHigh contrast OLED white display (128 x 64 pixels)
Power supply2 x AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh)
Power consumption250mA@ 2.6V average (display off, 100mW power)
Battery lifeapprox. 10 hours @ 10mW with Alkaline batteries
Temperature range-10 ÷ +55 °C
Dimensions75,7mm x 61,4mm x 19,4mm (HxWxD) without clip
WeightApprox. 140 g. without batteries (183 g. with lithium batt.)

Version:  v1.6.0

Date:  2022.06.22

MTP60

BOOTLOADER MTP60_BL_v1.2.0
• Bootloader upgrade to v1.2
• Bug fix: Timecode slipping after reboot

FIRMWARE MTP60_v1.6.0
New
• Add SD format (exFAT).
• Add SD icon when SD card detected.
• Add compatibility with Wisycom BT App.
• Add recorded file recovery when recording is stopped accidentaly.
• Add automatic audio gain setting during JAM.
• Changed 32-bit recording source signal.
• Improved the audio gain structure on the input stage.
• Changed Mic Mode menu (2W&P to PHA60-12, 2W+B&P to PHA60-48).
• Removed NiMh battery status pop up.
Bug FIX:
• Fixed TC in advance with Not Dropped Frame Rate
• Fixed TC slipping after reboot.
• Fixed the loss of Bit Depth setting after a reboot.
• Fixed bug on battery life detection.
• Minor bug fix

 

Below the video with the instruction to upgrade the Bootloader to v1.2.0 and firmware to v1.6.0:

Version:  v1.3.0

Date:  2022-02-15

MTP60

New:

  • New algorithms for battery time estimation
  • Added recording function
  • Improved some graphic details

Bug fix:

  • Minor bug fixed

NOTE: For a full audio compatibility  we recommend to upgrade your MCR54/MCR54-DUAL  to the latest firmware version
MCR54 firmware v1.22.0
MCR54-DUAL firmware v1.22.0

Configurator

CAUS
Clear
SKU: N/A Categories: ,

You may also like…